Topic: Anti Reverse Problem (Read 1620 times)

Mike Cork · « **on:** November 01, 2004, 07:47:04 AM »

ConnieK, I have a shimano curado that the anti reverse seems to not engage at times. When using a heavier bait like a spinner bait there are times when the anti reverse will not engage. Say I pick my rod up and swing it around to make a cast the bait will sling out as the reel back winds. It doesn't do it every time and I never notice it when I am casting as I have the reel disengaged and my thumb on the spool.

I guess my question is, the only thing that can cause this is the anti reverse bearing just under the handle, correct? and if so can I just replace that bearing? I know you have spare parts, if that is the fix do you have one?

Thanks

conniek · « **Reply #1 on:** November 01, 2004, 04:46:07 PM »

sounds like IAR to me. Yep, we got 'em. Send me your mailing addy and we'll just get you all fixed up. conniek JUst be sure when yo install it, to have lettering facing handle or otherwise you'll have yourself a left hander.

Mike Cork · « **Reply #2 on:** November 01, 2004, 04:58:37 PM »

Would cleaning it and a re-lube job help matters?

conniek · « **Reply #3 on:** November 01, 2004, 09:12:14 PM »

Mike, we clean our IAR with cotton swabs. no grease or oil on the little fingrers of the IAR. It is the clutch tube that sits inside the IAR that gets a tad bit of oil/grs mx applied to outside of it.

Mike Cork · « **Reply #4 on:** November 07, 2004, 05:48:12 PM »

Just wanted to thank Connie for sending me the new IAR, I stuck it right in but forgot to lube it

the first cast made the most horrible sound I have every heard

I got my lube out and took care of it, and by replacing that one piece it feels like a new reel. I don't know if the IAR helped snug things back up but she is humming like new again.

I wonder if that will help another reel I have that is very loose?

conniek · « **Reply #5 on:** November 08, 2004, 05:13:10 AM »

good for you mIke. We don't lube the IAR, just the outside of the tube that fits inside it. As for tightening up the reel, the IAR stops the handle from turning backward. Be sure the tube inside is seated properly.
Glad I have been a help. conniek

Bass Fishing Forum > General Bass Fishing Discussion > Rods, Reels and Fishing Line > Reels (Moderator: Mike Cork) > Topic: Anti Reverse Problem
Local Guides All Local Guides Alabama Alaska Arizona Arkansas California Colorado Connecticut DC Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming Laurie Cork Ph. (318)347-7380 You can Email Me Here Mike Cork Ph. (318)560-9827	« previous next » Pages: [1] Go Down Print Author Topic: Anti Reverse Problem (Read 1620 times) 0 Members and 1 Guest are viewing this topic. Mike Cork Father Time Admin Location: NW Louisiana Offline Gender: Posts: 37,315 Get the Net it's a Hawg Anti Reverse Problem « on: November 01, 2004, 07:47:04 AM » ConnieK, I have a shimano curado that the anti reverse seems to not engage at times. When using a heavier bait like a spinner bait there are times when the anti reverse will not engage. Say I pick my rod up and swing it around to make a cast the bait will sling out as the reel back winds. It doesn't do it every time and I never notice it when I am casting as I have the reel disengaged and my thumb on the spool. I guess my question is, the only thing that can cause this is the anti reverse bearing just under the handle, correct? and if so can I just replace that bearing? I know you have spare parts, if that is the fix do you have one? Thanks Logged I'd like to say Thank You to the companies that ensure I do my best: Legend Boats - Mercury Marine - Power Pole Dobyns Rods - Elite Tungsten conniek Smallmouth Location: Yantis, Texas 75497 Offline Gender: Posts: 384 FnG Re: Anti Reverse Problem « Reply #1 on: November 01, 2004, 04:46:07 PM » sounds like IAR to me. Yep, we got 'em. Send me your mailing addy and we'll just get you all fixed up. conniek JUst be sure when yo install it, to have lettering facing handle or otherwise you'll have yourself a left hander. Logged conniek-Gycb Pro Staff,Ask about our maint. video and training school- SEE US IN DEC ISSUE BASSMASTER Mike Cork Father Time Admin Location: NW Louisiana Offline Gender: Posts: 37,315 Get the Net it's a Hawg Re: Anti Reverse Problem « Reply #2 on: November 01, 2004, 04:58:37 PM » Would cleaning it and a re-lube job help matters? Logged I'd like to say Thank You to the companies that ensure I do my best: Legend Boats - Mercury Marine - Power Pole Dobyns Rods - Elite Tungsten conniek Smallmouth Location: Yantis, Texas 75497 Offline Gender: Posts: 384 FnG Re: Anti Reverse Problem « Reply #3 on: November 01, 2004, 09:12:14 PM » Mike, we clean our IAR with cotton swabs. no grease or oil on the little fingrers of the IAR. It is the clutch tube that sits inside the IAR that gets a tad bit of oil/grs mx applied to outside of it. Logged conniek-Gycb Pro Staff,Ask about our maint. video and training school- SEE US IN DEC ISSUE BASSMASTER Mike Cork Father Time Admin Location: NW Louisiana Offline Gender: Posts: 37,315 Get the Net it's a Hawg Re: Anti Reverse Problem « Reply #4 on: November 07, 2004, 05:48:12 PM » Just wanted to thank Connie for sending me the new IAR, I stuck it right in but forgot to lube it the first cast made the most horrible sound I have every heard I got my lube out and took care of it, and by replacing that one piece it feels like a new reel. I don't know if the IAR helped snug things back up but she is humming like new again. I wonder if that will help another reel I have that is very loose? Logged I'd like to say Thank You to the companies that ensure I do my best: Legend Boats - Mercury Marine - Power Pole Dobyns Rods - Elite Tungsten conniek Smallmouth Location: Yantis, Texas 75497 Offline Gender: Posts: 384 FnG Re: Anti Reverse Problem « Reply #5 on: November 08, 2004, 05:13:10 AM » good for you mIke. We don't lube the IAR, just the outside of the tube that fits inside it. As for tightening up the reel, the IAR stops the handle from turning backward. Be sure the tube inside is seated properly. Glad I have been a help. conniek Logged conniek-Gycb Pro Staff,Ask about our maint. video and training school- SEE US IN DEC ISSUE BASSMASTER Print Pages: [1] Go Up « previous next » Bass Fishing Forum > General Bass Fishing Discussion > Rods, Reels and Fishing Line > Reels (Moderator: Mike Cork) > Topic: Anti Reverse Problem	QUICK LINKS UB Home Main Forum Welcome Dock Talk Techniques Rods and Reels Tackle Box Catch of the Day UB Contests Tips and Ideas Sponsor Connection Fishing Reports Charter Members Only Boats 4 Sale BECOME A CHARTER MEMBER SUPPORT UB

News:

Author Topic: Anti Reverse Problem (Read 1620 times)