Topic: Jackplate step (Read 1274 times)

BassBUFF · « **on:** July 22, 2007, 07:48:29 AM »

Here's another tip for getting back in the boat after falling out or for the kids to use during a day of tubing. I saw these stainless steel steps mounted on the transom of another boat and it gave me the idea of putting it on the jackplate. I got this shipped to the door for $32. I just did a Google search for "folding step". West Marine also shows this in their catalog.

Here's the pics:

Bassinkorea · « **Reply #1 on:** July 22, 2007, 08:02:58 AM »

So small and so simple, yet this little thing could save a life......thanks for sharing

Eric C · « **Reply #2 on:** July 22, 2007, 09:23:51 AM »

The Utility Semi-Trailer Company uses them to climb the front of the refeer trailers to Open the top vent. They are very sturdy.

nlareau · « **Reply #3 on:** July 22, 2007, 10:05:50 AM »

Quote from: BassBUFF on July 22, 2007, 07:48:29 AM

Here's another tip for getting back in the boat after falling out or for the kids to use during a day of tubing. I saw these stainless steel steps mounted on the transom of another boat and it gave me the idea of putting it on the jackplate. I got this shipped to the door for $32. I just did a Google search for "folding step". West Marine also shows this in their catalog.

Here's the pics:

Yeah, that is cool.

I let the kids jump out of the boat and go swim the other day. I thought it was amazing how hard a time they had getting back into the boat. That's with a rope ladder over the side to help. I'm convinced that if you have a lot of clothes on and no ladder you are in deep trouble if you fall into cold wather.

Just_Old_Fisherman · « **Reply #4 on:** July 24, 2007, 09:26:13 AM »

One tip I saw was that the easiest way to get back in the boat, especially if it is a large person, is to ride the motor up. Get behind the motor then use the tilt button on the motor to tilt it up as far as possible. Lifts you up on the motor then you can crawl up the motor to get in the boat. This is assuming you have the tilt switch on the motor.

K-Dub · « **Reply #5 on:** July 24, 2007, 12:26:19 PM »

Ok this one I like. Making note to have this added next time the boat goes in for maintenance.

Bass Fishing Forum > Tips and Ideas > General Tips (Moderator: Bassinkorea) > Topic: Jackplate step
Local Guides All Local Guides Alabama Alaska Arizona Arkansas California Colorado Connecticut DC Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming Laurie Cork Ph. (318)347-7380 You can Email Me Here Mike Cork Ph. (318)560-9827	« previous next » Pages: [1] Go Down Print Author Topic: Jackplate step (Read 1274 times) 0 Members and 1 Guest are viewing this topic. BassBUFF LM Community Diplomat Location: Benton, LA Online Gender: Posts: 8,774 '07 LEGEND LE195 w/200 Opti Jackplate step « on: July 22, 2007, 07:48:29 AM » Here's another tip for getting back in the boat after falling out or for the kids to use during a day of tubing. I saw these stainless steel steps mounted on the transom of another boat and it gave me the idea of putting it on the jackplate. I got this shipped to the door for $32. I just did a Google search for "folding step". West Marine also shows this in their catalog. Here's the pics: « Last Edit: October 04, 2007, 06:25:01 PM by Bassinkorea » Logged Moderator Team 3 Leader LEGEND Boats Bassinkorea UB Nightshift Moderator Location: South Korea Online Gender: Posts: 22,703 Born to fish .... Forced to work Re: Jackplate step « Reply #1 on: July 22, 2007, 08:02:58 AM » So small and so simple, yet this little thing could save a life......thanks for sharing Logged SureCatch Korea Prostaff Eric C Ultimate Basser Location: Henagar, Alabama Offline Gender: Posts: 3,065 Bass'n in Bama Re: Jackplate step « Reply #2 on: July 22, 2007, 09:23:51 AM » The Utility Semi-Trailer Company uses them to climb the front of the refeer trailers to Open the top vent. They are very sturdy. Logged Fishin' is my Mission nlareau Ultimate Basser Location: Atlanta, GA Offline Gender: Posts: 3,101 Living in Atlanta, wishing I was in Charleston Re: Jackplate step « Reply #3 on: July 22, 2007, 10:05:50 AM » Quote from: BassBUFF on July 22, 2007, 07:48:29 AM Here's another tip for getting back in the boat after falling out or for the kids to use during a day of tubing. I saw these stainless steel steps mounted on the transom of another boat and it gave me the idea of putting it on the jackplate. I got this shipped to the door for $32. I just did a Google search for "folding step". West Marine also shows this in their catalog. Here's the pics: Yeah, that is cool. I let the kids jump out of the boat and go swim the other day. I thought it was amazing how hard a time they had getting back into the boat. That's with a rope ladder over the side to help. I'm convinced that if you have a lot of clothes on and no ladder you are in deep trouble if you fall into cold wather. Logged The early bird may get the worm, but it is the second mouse that gets the cheese. Just_Old_Fisherman Smallmouth Location: San Angelo, Tx Offline Gender: Posts: 204 Re: Jackplate step « Reply #4 on: July 24, 2007, 09:26:13 AM » One tip I saw was that the easiest way to get back in the boat, especially if it is a large person, is to ride the motor up. Get behind the motor then use the tilt button on the motor to tilt it up as far as possible. Lifts you up on the motor then you can crawl up the motor to get in the boat. This is assuming you have the tilt switch on the motor. Logged aka: links_man2 K-Dub Largemouth Location: Prattville, Alabama Offline Gender: Posts: 646 Re: Jackplate step « Reply #5 on: July 24, 2007, 12:26:19 PM » Ok this one I like. Making note to have this added next time the boat goes in for maintenance. Logged Ken Print Pages: [1] Go Up « previous next » Bass Fishing Forum > Tips and Ideas > General Tips (Moderator: Bassinkorea) > Topic: Jackplate step	QUICK LINKS UB Home Main Forum Welcome Dock Talk Techniques Rods and Reels Tackle Box Catch of the Day UB Contests Tips and Ideas Sponsor Connection Fishing Reports Charter Members Only Boats 4 Sale BECOME A CHARTER MEMBER SUPPORT UB

News:

Author Topic: Jackplate step (Read 1274 times)