Topic: 97 skeeter (Read 988 times)

airforcechief11 · « **on:** January 24, 2010, 12:24:04 PM »

Hey Guys,

Just wondering where you guys mount your transducer?

iClass · « **Reply #1 on:** February 04, 2010, 10:47:46 AM »

I have two different areas for different transducers. The first and my primary is a through hull and the second (side imaging) is mounted on the side of the Jack Plate.

Have mounted them at the base of the hull just above a "level" strake before. I prefer the 'through hull' method as opposed to drilling a couple of holes in the boat. (Have done it that way before and never had any problems as long as you use marine grade silicone, just my preference)

bass11.11 · « **Reply #2 on:** February 11, 2010, 12:19:00 PM »

Through the hull for me. Around here in nw la. way too many stumps to tear it off.

Bass Fishing Forum > Bass Boats > Skeeter Boats > Topic: 97 skeeter
Local Guides All Local Guides Alabama Alaska Arizona Arkansas California Colorado Connecticut DC Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming Laurie Cork Ph. (318)347-7380 You can Email Me Here Mike Cork Ph. (318)560-9827	« previous next » Pages: [1] Go Down Print Author Topic: 97 skeeter (Read 988 times) 0 Members and 1 Guest are viewing this topic. airforcechief11 Smallmouth Location: Shreveport, Louisiana Online Gender: Posts: 152 97 skeeter « on: January 24, 2010, 12:24:04 PM » Hey Guys, Just wondering where you guys mount your transducer? Logged Temple Fork Outfitters Pro Staff Parasite Weights Pro Staff www.parasiteweights.com iClass CM Community Diplomat Location: Pineville, LA. Offline Gender: Posts: 4,316 Hat Cams - Now Recording! Re: 97 skeeter « Reply #1 on: February 04, 2010, 10:47:46 AM » I have two different areas for different transducers. The first and my primary is a through hull and the second (side imaging) is mounted on the side of the Jack Plate. Have mounted them at the base of the hull just above a "level" strake before. I prefer the 'through hull' method as opposed to drilling a couple of holes in the boat. (Have done it that way before and never had any problems as long as you use marine grade silicone, just my preference) Logged Denali Rods Solar Bat Elite Tungsten El Grande Lures Bow To Stern Line and Lure bass11.11 Smallmouth Location: Shreveport, La. Online Gender: Posts: 381 Jeff Nash Re: 97 skeeter « Reply #2 on: February 11, 2010, 12:19:00 PM » Through the hull for me. Around here in nw la. way too many stumps to tear it off. Logged Print Pages: [1] Go Up « previous next » Bass Fishing Forum > Bass Boats > Skeeter Boats > Topic: 97 skeeter	QUICK LINKS UB Home Main Forum Welcome Dock Talk Techniques Rods and Reels Tackle Box Catch of the Day UB Contests Tips and Ideas Sponsor Connection Fishing Reports Charter Members Only Boats 4 Sale BECOME A CHARTER MEMBER SUPPORT UB

News:

Author Topic: 97 skeeter (Read 988 times)

airforcechief11

97 skeeter

iClass

Re: 97 skeeter

bass11.11

Re: 97 skeeter