Topic: 92 ranger 361v (Read 3071 times)

chevyman3361 · « **on:** February 07, 2010, 01:54:03 PM »

hi all. new to the site and found it because i am trying to figure out how to remove the bench seat from my 92 ranger 361v. doing some work to the boat and have pretty much everything removed but the seat and still cant find a release or bolts to remove the seat. any help would be appreciated. thanks in advance

tournyangler · « **Reply #1 on:** March 08, 2010, 04:31:11 PM »

Chevyman3361, Did you ever figure out how to remove the seat in your boat?

I have a 1991 361V and I need to remove the seat to access the fuel tanks. The fuel bulb collapses after a few minutes of running. I figure the fuel line must be plugged.

Can you or anyone tell me how to remove the bench seat?

Tournyangler

Rudy · « **Reply #2 on:** August 13, 2010, 09:28:57 AM »

There are two panels on he seat back that extend from the hi-backs to the carpet. You will need to gently pry the panels up from the carpet end upward. The panels are held in place with velcro.
Once you have opened those panels you will see screws holding the seats in place. Remove the screws and tilt the seat forward to dislodge the forward attachment.

Bass Fishing Forum > Bass Boats > Ranger Boats (Moderator: Basser56) > Topic: 92 ranger 361v
Local Guides All Local Guides Alabama Alaska Arizona Arkansas California Colorado Connecticut DC Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming Laurie Cork Ph. (318)347-7380 You can Email Me Here Mike Cork Ph. (318)560-9827	« previous next » Pages: [1] Go Down Print Author Topic: 92 ranger 361v (Read 3071 times) 0 Members and 2 Guests are viewing this topic. chevyman3361 UB Member Offline Posts: 2 92 ranger 361v « on: February 07, 2010, 01:54:03 PM » hi all. new to the site and found it because i am trying to figure out how to remove the bench seat from my 92 ranger 361v. doing some work to the boat and have pretty much everything removed but the seat and still cant find a release or bolts to remove the seat. any help would be appreciated. thanks in advance Logged tournyangler UB Member Location: Florida Offline Posts: 5 FnG Re: 92 ranger 361v « Reply #1 on: March 08, 2010, 04:31:11 PM » Chevyman3361, Did you ever figure out how to remove the seat in your boat? I have a 1991 361V and I need to remove the seat to access the fuel tanks. The fuel bulb collapses after a few minutes of running. I figure the fuel line must be plugged. Can you or anyone tell me how to remove the bench seat? Tournyangler Logged Rudy Smallmouth Location: Belleville, Illinois Offline Gender: Posts: 39 Life is Good! Re: 92 ranger 361v « Reply #2 on: August 13, 2010, 09:28:57 AM » There are two panels on he seat back that extend from the hi-backs to the carpet. You will need to gently pry the panels up from the carpet end upward. The panels are held in place with velcro. Once you have opened those panels you will see screws holding the seats in place. Remove the screws and tilt the seat forward to dislodge the forward attachment. Logged Rudy Cardenas Belleville IL Steel City Bassmasters Print Pages: [1] Go Up « previous next » Bass Fishing Forum > Bass Boats > Ranger Boats (Moderator: Basser56) > Topic: 92 ranger 361v	QUICK LINKS UB Home Main Forum Welcome Dock Talk Techniques Rods and Reels Tackle Box Catch of the Day UB Contests Tips and Ideas Sponsor Connection Fishing Reports Charter Members Only Boats 4 Sale BECOME A CHARTER MEMBER SUPPORT UB

News:

Author Topic: 92 ranger 361v (Read 3071 times)

chevyman3361

92 ranger 361v

tournyangler

Re: 92 ranger 361v

Rudy

Re: 92 ranger 361v