Topic: Hull repair ( Shreveport Bossier area) (Read 784 times)

Scott K. · « **on:** February 17, 2010, 09:22:52 AM »

Hey all,

Got a 2008 Z-7. While washing it last month I noticed an area near the motor about 2"x2" that has had the gel coat torn off. I can imagine it came off while in the Red River earlier in 2009. Anyways, what I'm writing for is to inquire of a good place in Shreveport/Bossier area to get the hull repaired. There is no internal structural damage, just the gel coat was torn. I live in Minden and can go almost anywhere in the area.

Thanks for the replys in advance,

Scott

-Steve- · « **Reply #1 on:** February 17, 2010, 10:02:41 AM »

Check with BPS and see where they would recomend, I'm not from around your area but I have learned a bunch just by asking questions in the right place...Steve

I just googled this...

Caddo Fiberglass
1953 Motes Island Street
Shreveport, LA 71107-5428
(318) 424-3470

Railroader · « **Reply #2 on:** February 17, 2010, 11:34:38 AM »

I had a 04 nitro 882 and had some hull damage, called BPS and they do have a guy that does hull work. You should call BPS and ask..

Scott K. · « **Reply #3 on:** February 17, 2010, 05:13:56 PM »

Thanks guys, didn't know BPS had a hull repair person. Just hope it doesnt take forever to get it fixed ow. I'm itching to hit the water.

Scott

Railroader · « **Reply #4 on:** February 17, 2010, 06:03:14 PM »

Well i think they just have somebody they send buisness too, he has a shop off grimmit dr off north market. Cross lake was low and found a piece of pipe over by the 40/8 put a 5ft gash, he did a really good job..

Scott K. · « **Reply #5 on:** February 18, 2010, 11:33:50 PM »

Thanks, Dropped boat off at BPS, manager there said they had a guy that worked at Moore's that fixed their hulls. Covered on my warranty and should be fixed by next week.

Scott

-Steve- · « **Reply #6 on:** February 19, 2010, 01:01:52 PM »

Good deal Scott, thanks for the update...Steve

Bass Fishing Forum > Bass Boats > Nitro Bass Boats > Topic: Hull repair ( Shreveport Bossier area)
Local Guides All Local Guides Alabama Alaska Arizona Arkansas California Colorado Connecticut DC Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming Laurie Cork Ph. (318)347-7380 You can Email Me Here Mike Cork Ph. (318)560-9827	« previous next » Pages: [1] Go Down Print Author Topic: Hull repair ( Shreveport Bossier area) (Read 784 times) 0 Members and 1 Guest are viewing this topic. Scott K. Smallmouth Location: Louisiana Offline Gender: Posts: 156 Hull repair ( Shreveport Bossier area) « on: February 17, 2010, 09:22:52 AM » Hey all, Got a 2008 Z-7. While washing it last month I noticed an area near the motor about 2"x2" that has had the gel coat torn off. I can imagine it came off while in the Red River earlier in 2009. Anyways, what I'm writing for is to inquire of a good place in Shreveport/Bossier area to get the hull repaired. There is no internal structural damage, just the gel coat was torn. I live in Minden and can go almost anywhere in the area. Thanks for the replys in advance, Scott Logged -Steve- Life Member Location: Ava, Mo. Offline Gender: Posts: 2,587 In God We Trust!!! All others pay cash!!! Re: Hull repair ( Shreveport Bossier area) « Reply #1 on: February 17, 2010, 10:02:41 AM » Check with BPS and see where they would recomend, I'm not from around your area but I have learned a bunch just by asking questions in the right place...Steve I just googled this... Caddo Fiberglass 1953 Motes Island Street Shreveport, LA 71107-5428 (318) 424-3470 Logged \My Mind is a Library Full of Worthless Information\ Railroader Club Board Mod Location: shreveport Offline Gender: Posts: 2,998 BACK 2 BACK AOY 06' 07' Re: Hull repair ( Shreveport Bossier area) « Reply #2 on: February 17, 2010, 11:34:38 AM » I had a 04 nitro 882 and had some hull damage, called BPS and they do have a guy that does hull work. You should call BPS and ask.. Logged Scott K. Smallmouth Location: Louisiana Offline Gender: Posts: 156 Re: Hull repair ( Shreveport Bossier area) « Reply #3 on: February 17, 2010, 05:13:56 PM » Thanks guys, didn't know BPS had a hull repair person. Just hope it doesnt take forever to get it fixed ow. I'm itching to hit the water. Scott Logged Railroader Club Board Mod Location: shreveport Offline Gender: Posts: 2,998 BACK 2 BACK AOY 06' 07' Re: Hull repair ( Shreveport Bossier area) « Reply #4 on: February 17, 2010, 06:03:14 PM » Well i think they just have somebody they send buisness too, he has a shop off grimmit dr off north market. Cross lake was low and found a piece of pipe over by the 40/8 put a 5ft gash, he did a really good job.. Logged Scott K. Smallmouth Location: Louisiana Offline Gender: Posts: 156 Re: Hull repair ( Shreveport Bossier area) « Reply #5 on: February 18, 2010, 11:33:50 PM » Thanks, Dropped boat off at BPS, manager there said they had a guy that worked at Moore's that fixed their hulls. Covered on my warranty and should be fixed by next week. Scott Logged -Steve- Life Member Location: Ava, Mo. Offline Gender: Posts: 2,587 In God We Trust!!! All others pay cash!!! Re: Hull repair ( Shreveport Bossier area) « Reply #6 on: February 19, 2010, 01:01:52 PM » Good deal Scott, thanks for the update...Steve Logged \My Mind is a Library Full of Worthless Information\ Print Pages: [1] Go Up « previous next » Bass Fishing Forum > Bass Boats > Nitro Bass Boats > Topic: Hull repair ( Shreveport Bossier area)	QUICK LINKS UB Home Main Forum Welcome Dock Talk Techniques Rods and Reels Tackle Box Catch of the Day UB Contests Tips and Ideas Sponsor Connection Fishing Reports Charter Members Only Boats 4 Sale BECOME A CHARTER MEMBER SUPPORT UB

News:

Author Topic: Hull repair ( Shreveport Bossier area) (Read 784 times)