Bass Fishing Forum

Bass Boats => Ranger Boats => Topic started by: bassfisherman94 on August 25, 2012, 06:50:05 PM

Title: Ranger 361v Flush trolling motor peddle
Post by: bassfisherman94 on August 25, 2012, 06:50:05 PM
Is it possible to put in a Flush trolling motor pedal mount in a 361v? Looking to get a 361v and would like to possibly do this.

Thanks
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: got_musky on October 17, 2016, 08:53:37 PM
Just got myself a 94 361V. Looking into doing this as well. Anyone have any comments/suggestions beforehand?
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: got_musky on January 20, 2017, 08:15:29 AM
Bump...Anyone?

If not, I guess I'll post pictures after diving into project.
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: yota2000 on January 20, 2017, 12:35:57 PM
A flush mount can be install as long as there is no obstruction underneath where you will be cutting.
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: got_musky on April 04, 2017, 08:27:02 PM
Finished this weekend. Cut hole in deck with jigsaw, cleared out foam and installed drain to pvc tube in hull. Sealed exposed plywood and foam with fiberglass resin.

Added an aluminum bracket for helix 10 mount above.
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: Oldfart9999 on April 05, 2017, 06:49:00 AM
Good job! ~c~ ~c~ Thanks for the pics!!! ~c~ ~c~
Rodney
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: Kris on April 05, 2017, 07:08:19 AM
That looks really nice, good job!
I missed this thread when originally posted in August.  I have a 360V and figure I can fit one in my front locker.  Like you, I will need to route a drain from my pan to the rear of the locker to keep my stuff from getting wet.  Gonna start working on my 87 360V soon and will probably have to put another trolling motor on it.  I have always been a hand control guy but since putting a foot control and pan on my aluminum boat I will probably put a foot control on it.
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: DeanMac on December 30, 2017, 12:32:53 PM
Thanks for the pictures, hope to do the same to a 364V I recently purchased.

Where did you get your pan?
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: Fishin_Bill on January 04, 2018, 11:54:41 AM
BPS has these pans, but I found them at a local tackle shop here in SC for about 1/2 price.
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: Smallie_Stalker on January 04, 2018, 12:46:00 PM
Hey Bill. Welcome to the Ultimate Bass family! Pleasure to have you with us. Pull up a chair, make yourself right at home and jump in wherever you feel comfortable. 

Thank you for stepping in to help with this question.

When you get a minute could you please stop by the  Let Us Get To Know You  (http://www.ultimatebass.com/bass-fishing-forum/index.php?board=254.0) board and maybe tell us a little bit about yourself?  ~sun

If you would like to win some free gear from some of the great companies that sponsor our site be sure and put your name in for the  New Memberís Contest  (http://www.ultimatebass.com/bass-fishing-forum/index.php?topic=138058.0) and the  Weekly Contests  (http://www.ultimatebass.com/bass-fishing-forum/index.php?board=193.0).

Looking forward to seeing you around the boards and to learning from what you share with us.

In the meantime, if you need any help with anything at all please don't hesitate to contact me or any other staff member.

Once again, Welcome!

><> Smallie_Stalker  <><
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: WTodd on January 04, 2018, 03:16:24 PM
A couple of things: 1st if anyone needs to know if you have the ďclearanceĒ call the manufacturer and they can tell you pretty quickly. 2nd, I have a Helix 7 and I will probably mount mine like you did; thatís damn smooth. Iím installing a recess tray next week if it ever gets delivered 🤬


Sent from my iPhone using Tapatalk
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: WTodd on January 04, 2018, 06:00:25 PM
Finished this weekend. Cut hole in deck with jigsaw, cleared out foam and installed drain to pvc tube in hull. Sealed exposed plywood and foam with fiberglass resin.

Added an aluminum bracket for helix 10 mount above.
Can you give me the dimensions on the aluminum bracket and how itís mounted? Is it just bolted to the floor (I canít quite tell)?


Sent from my iPhone using Tapatalk
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: got_musky on March 14, 2018, 04:30:11 PM
I believe I made it 1ft(to span the tray) x 3-3/4" . I made it up myself. Will actually have to do a new one since the new Ultrex does not fit into the tray I have there now. Will be taking out in the next month and replacing with the Comfortroll D-Lux.

Title: Re: Ranger 361v Flush trolling motor peddle
Post by: got_musky on March 14, 2018, 04:31:31 PM
Thanks for the pictures, hope to do the same to a 364V I recently purchased.

Where did you get your pan?

Tacklewarehouse - Comfortroll std. tray.
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: Ice Cold Peanuts on May 17, 2019, 03:10:42 PM
After looking at your pictures it looks like one of us put our tray in backwards. I have the round part of the tray furthest forward. Maybe it doesn't matter. My heart fluttered for a moment.
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: Bud Kennedy on May 17, 2019, 03:14:14 PM
Put one in my Ranger 365V last year.  I got the product from R&R Design.  If you buy from R&R direct then you will get the drain connection and hose already installed.  If you buy from other sources you will only get the tray and nothing else.   

(https://imagizer.imageshack.com/v2/xq90/922/gwBPaC.jpg) (https://imageshack.com/i/pmgwBPaCj)
Title: Re: Ranger 361v Flush trolling motor peddle
Post by: Ice Cold Peanuts on May 17, 2019, 03:26:42 PM
I bought the Comfort Troll. It came with the drain hose and clamp but they weren't already hooked up. I've fished with this now a half dozen times and whoever said it was a great addition to the boat wasn't lying. I love it.