1974 Merc 20hp water impeller is stuck

Started by DaubsNU1, August 24, 2020, 04:26:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

DaubsNU1

Got the lower unit removed from the old Merc. Got the cover off the water pump...but the impeller seems like it's rusted on the drive shaft. 

I've tried soaking with penetrating oil, but it seems to be really stuck on there.

Suggestions how to get it off? Thanks!  Daubs

Dog

Tap it back and forth with a brass drift and a hammer it should loosen. I have had to pry them up a couple of times.

Oldfart9999

Just be careful so you don't do any damage, use some never seize when you reinstall a new impeller.
Rodney
Old Fishermen never die, their rods just go limp.

TNDiver

Never seize is awesome.  I think I have some that is probably over 25 years old and it still works great!
There is nothing like sharing any moment outdoors with someone special!

UB Life Member: Starcraft Deck Boat with Minnkota Fortrex and Garmin Echomap Plus

DaubsNU1

Never seize is a great suggestion! 

I managed to get the impeller off the drive shaft. Got out the dremel and carefully ground through the impeller, making sure not to damage the drive shaft. 

It is off! New parts should be here by Friday!