What epoxy do you guys use for crank baits? I have been using the gorilla glue 2 part epoxy which is ok and it works but it is a pain in the but to use because if how thick it is. I wanna use something that is much thinner and makes a smoother coat. So I just was wondering what you guys use? Thanks a ton!
30min 2 part epoxy from the hardware store. It has to be 30min or more. Don't get the 5 min stuff.
And yeah the gorilla I don't like.
This stuff is still a little thick but, it's easier to put on & smooths out nice when it dries.
Quote from: Polaris425 on October 16, 2014, 11:28:13 AM
30min 2 part epoxy from the hardware store. It has to be 30min or more. Don't get the 5 min stuff.
And yeah the gorilla I don't like.
This stuff is still a little thick but, it's easier to put on & smooths out nice when it dries.
I'll check that out for sure thanks!
(https://www.ultimatebass.com/bass-fishing-forum/proxy.php?request=http%3A%2F%2Ftapatalk.imageshack.com%2Fv2%2F14%2F10%2F16%2Ff5733f5eec16edb015bfd0702c19edfb.jpg&hash=9a2309eb8c0c342b4eba497c54c6e3b340d6d0ad)
This is what I've been using.
Quote from: Polaris425 on October 16, 2014, 12:58:54 PM
(https://www.ultimatebass.com/bass-fishing-forum/proxy.php?request=http%3A%2F%2Ftapatalk.imageshack.com%2Fv2%2F14%2F10%2F16%2Ff5733f5eec16edb015bfd0702c19edfb.jpg&hash=9a2309eb8c0c342b4eba497c54c6e3b340d6d0ad)
This is what I've been using.
ok gotcha. So you say this stuff is pretty good? It isn't too thick? I mean the gorilla glue is like overly thick. It works but it doesn't work great by any means.
Yeah it's pretty good. It's what several people I know use so that's why I used it. It's not thin like paint but it's not super thick like glue.
Quote from: Polaris425 on October 16, 2014, 01:56:28 PM
Yeah it's pretty good. It's what several people I know use so that's why I used it. It's not thin like paint but it's not super thick like glue.
cool I'm definitley gonna use that next time. I have seen some videos of professionals and they use stuff that is almost put liquid it's weird. I wonder what stuff that is?
I've been using Devcon brand for many years & it works fine for me. I don't coat crankbaits, but have done hundreds of fly rod poppers of various sizes.
I agree with the 30 min or more set time type. That's been my experience as well. Those times I've tried using 5 minute it never came out as I wanted. The stuff sets too fast & often turns yellow.
You can thin epoxy with alcohol for coatings & prolong the setting a bit. I prefer to use ethyl alcohol (camp stove fuel), but isopropyl will work too. Isopropyl alcohol will often cause the epoxy mixture to turn a milky color due to the water in the alcohol, but it will still work. Depending on how much you're mixing at one time, only need a couple of drops of the alcohol.
If you're working with epoxy, get some cheap pipettes or eye droppers for adding the alcohol.