Hull repair ( Shreveport Bossier area)

[Scott K.]

Hey all,

Got a 2008 Z-7. While washing it last month I noticed an area near the motor about 2"x2" that has had the gel coat torn off. I can imagine it came off while in the Red River earlier in 2009. Anyways, what I'm writing for is to inquire of a good place in Shreveport/Bossier area to get the hull repaired. There is no internal structural damage, just the gel coat was torn. I live in Minden and can go almost anywhere in the area.

Thanks for the replys in advance,

Scott

[-Steve-]

Check with BPS and see where they would recomend, I'm not from around your area but I have learned a bunch just by asking questions in the right place...Steve


I just googled this...

Caddo Fiberglass
1953 Motes Island Street
Shreveport, LA 71107-5428
(318) 424-3470

[Railroader]

I had a 04 nitro 882 and had some hull damage, called BPS and they do have a guy that does hull work. You should call BPS and ask..

[Scott K.]

Thanks guys, didn't know BPS had a hull repair person. Just hope it doesnt take forever to get it fixed ow. I'm itching to hit the water.

Scott

[Railroader]

Well i think they just have somebody they send buisness too, he has a shop off grimmit dr off north market. Cross lake was low and found a piece of pipe over by the 40/8 put a 5ft gash, he did a really good job..

[Scott K.]

Thanks,  Dropped boat off at BPS, manager there said they had a guy that worked at Moore's that fixed their hulls. Covered on my warranty and should be fixed by next week.

Scott

[-Steve-]

Good deal Scott, thanks for the update...Steve