in order to get a spinnerbait deep in the 20+ depths
1/2 oz or larger weight
You will need a single willow leaf like a #5 medium or a large #7
the idea of a single willow leaf it has the flash but it doesn't have the lift of the Indiana or the colorado blades on the tail
If you don't have a single willow leaf spinnerbait , let's make one
most of the times you might have a colorado in front of the willow
I cut the clevis off that takes the front blade off
now you just have the rear willow leaf on there.
Now take a 3/8oz rubber core sinker
and pull out the rubber from the middle of the sinker
and put the sinker on the hook on the strait part"shank" of the hook under the skirt
sometimes you will need to open up the sinker to get it on the hook.
Now take your pliers and squeeze the sinker so it wont fall off.
now you have a very deep deadly spinnerbait its almost a full 1oz