Blazer210ProV Speeds

[jroe210]

Blazer210ProV have you had a chance to get some speeds on your 210 yet?  I am going to repitch my 27 TXP down to a 26 TXP.  At the OT a guy ran 76 @ 5800 with tourney load, water in livewells, etc...  I would love to see 76 out of her.

[Blazer210ProV]

I have seen 75 gps before i blew my powerhead and i'm still in the process of breaking it in again. I was running a 25 TXP 3/4 above the pad and i put a 26 trophy on it the other day and it was hauling    when it finally came out of the water. It took forever to get it up on plane, so i need to get a cavitation ring for the trophy prop. After break in Mel over at smiths told me he would have it doing between 80-85 with some MINOR ADJUSTMENTS. 

[jroe210]

Wow.  I am still breaking mine in but have only seen 74 @ 5400.  I am running the 27 TXP but plan on getting it worked down to a 26 TXP to bring my RPM's up.  I seen at the OT that a guy with a brand new 210/250 Yama combo was able to run 76MPH with a full load (2 people, equipment, 36V trolling motor, and water in live wells).  So, I think we should be able to get close to 80 MPH but I'm not sure about 85MPH.  I think if you put that Phase II kit you could do it, but not stock.  Trophy is a good prop, I had problems with my TXP cavatating when I first got it but the PVS holes were open.  I got some med. plugs and stopped that.  Let me know when you get her broke in and by then I may have my prop back.  We can meet somewhere and try each others setup.  What kind of signs did you have on the motor going?  I am really worried about my 250 since it seems they have had some problems with them.

[Blazer210ProV]

Well if Mel tells me he can get me to 85, i WILL SURE LET HIM TRY TO GET ME THERE. He has plenty of experience with fast motors because he races boats. I had no signs of my motor going, IT JUST WENT. I have heard of at least 30 going down in the last several months, so i hope you got one of the good ones.